AnchorGuard Corrosion Control System for Tower Anchors is appropriate for virtually all guy anchors as a precautionary measure. The AnchorGuard System is strongly advised if you answer true to any of the following questions:

• Corrosion is present below grade on the anchors in question or other adjacent structures, or underground corrosion has previously been identified as a problem in the area. For Example, see our Corrosion Severity Factor.
• Tower grounding incorporates more than one copper ground rod at each anchor and more than three at the tower base, or tower is to be electrically connected to other buried structures, i.e. fencing, buildings, buried tanks, underground power cables, etc.
• Tower anchors are subject to stray current generated from sources such as adjacent buried pipelines or other cathodically protected structures, welding or plating facilities, electrified railways or other sources of artificially induced ground current.
• Tower is located near electrical substation or other highly grounded facility.
• Guy anchors are located in water, saturated soil or soil rich in salts.
• The tower site is located where fertilization of vegetation is common.